1050 aluminium coiled tube
Litlhaloso
Tlhaloso e tloaelehileng ea tube ea Aluminium
Alloy Che. | Khalefo | Straight Tube | LWC | ||
OD(mm) | WT(mm) | OD(mm) | WT | ||
1060(L2) | R(H112) | 6-30 | 0.6-3 | 4 ~ 22 | 0.2~2 |
M(O) | 6-30 | 0.6-3 | 4 ~ 22 | 0.2~2 | |
H 14 | 6-30 | 0.6-3 | 4 ~ 22 | 0.2~2 | |
3A21 3003 3103 (LF21) | M(O) | 6-30 | 0.6-3 | 4 ~ 22 | 0.2~2 |
H12 | 6-30 | 0.6-3 | 4 ~ 22 | 0.2~2 | |
H14 | 6-30 | 0.6-3 | 4 ~ 22 | 0.2~2 | |
H18 | 6-30 | 0.6-3 | 4 ~ 22 | 0.2~2 | |
6063 (LD31) | M(O) | 6-30 | 0.6-3 | 4 ~ 22 | 0.5~2 |
T4 | 6-30 | 0.6-3 | 4 ~ 22 | 0.5~2 | |
T6 | 6-30 | 0.6-3 | 4 ~ 22 | 0.5~2 |
Tlhaloso ea Inner Groove Aluminium Tube (Boholo bo ka etsoa ka mokhoa o ikhethileng)
Tlhaloso(mm) | Botenya ba lebota(mm) | Grooved Height(mm) | Helical angle(°) |
7 | 0.4-0.5 | 0.05-0.18 | 18 |
7.94 | 0.4-0.5 | 0.05-0.18 | 18 |
9.52 | 0.45-0,55 | 0.05-0.18 | 18 |
Thepa ea Mechini ea Inner Aluminium Grooved Tube
Lintho tse bonahalang | Tensile | Elongation Rate | Ho Atolosa Sekhahla |
3003 | 130MPA | 35 | 40 |
Tlhaloso ea Coil ea Pakete
OD | 6.35 | 7.94 | 9.52 | 12.7 | 15.88 | 19.05 |
Botenya ba Lerako | 0.7-1.0 | 0.8-1,2 | 0.8-1.2 | 1-1.5 | 1-1.5 | 1-1.5 |
quanlity gurantee
1) Ponahalo ea bokaholimo: bokaholimo bo hloekileng bo se nang letho, bohloeki, bo litšila ba oli kapa bo na le oxidation.
2) ho itšeha: moeli o makhethe ha o na li-burrs.
3) Sepheo sa boleng: tekanyo e tšoanelehang ea tlhahlobo ea sehlahisoa sa frist ke 98%.khotsofalo ea bareki ka 95%.Material: A1050, A1060, A1070, A3003, joalo-joalo.
A1050 Aluminium Chemical Sebopeho | |||||||||
Al | Si | Cu | Mg | Zn | Mn | Ti | V | Fe | Ba bang |
99.5-100 | 0~0.25 | 0~0.05 | 0~0.05 | 0~0.05 | 0~0.05 | 0~0.03 | 0~0.05 | 0~0.40 | 0~0.03 |
A1060 Aluminium Chemical Sebopeho | |||||||||
Al | Si | Cu | Mg | Zn | Mn | Ti | V | Fe | Ba bang |
99.6-100 | 0~0.25 | 0~0.05 | 0~0.03 | 0~0.05 | 0~0.03 | 0~0.03 | / | 0~0.35 | |
A1070 Aluminium Chemical Sebopeho | |||||||||
Al | Si | Cu | Mg | Zn | Mn | Ti | V | Fe | Ba bang |
99.7-100 | 0~0.2 | 0~0.04 | 0~0.03 | 0~0.04 | 0~0.03 | 0~0.03 | 0~0.05 | 0~0.25 |
A3003 Aluminium Chemical Sebopeho | |||||||
Al | Si | Cu | Zn | Mn | Fe | Ba bang ha ba Soha | |
ba bang | 0~0.6 | 0.05~0.20 | 0~0.1 | 1.0 ~ 1.5 | 0~0.70 | 0~0.05 |
Alloy | Khalefo | Tlhaloso | |||
Botenya(mm) | Diameter(mm) | Matla a tšepe | Ho thatafala | ||
7075 7005(tube) | T5,T6,T9 | >0.5 | 5.0-80 | >310 Mpa | >140 |
6061 6063(profile) | T5,T6 | >1.6 | 10-180 | > 572 Mpa | HB90-110 |
Bolelele: <6Meter |
MOHALE | BOTETE(mm) | MATLA A TŠEPE | ELONGATION% | Standard |
T5 | 0.4-5 | 60-100 | ≥20 | GB/T3190-1996 |
T6 | 0.5-6 | 70-120 | ≥4 | |
T9 | 0.5-6 | 85-120 | ≥2 |
Sehlahisoa sa Aluminium
Ngola molaetsa wa hao mona mme o re romele wona