Kereiti 316L/1.4404 Cold/Hot Rolled Stainless Steel Coils/Strips With No.1/2B/BA Surface Finish
| Sengoloa | Likhoele tsa tšepe tse 316L |
| tlhaloso | Botenya(0.3mm-6mm)*Bophara(30mm-1219mm)*Koele |
| Bokaholimo | No.1/2B/BA |
| mofuta | khoele |
| Standard | ASTM JIS EN GB |
| Tšebeliso | lebala la kaho, indasteri ea kaho ea likepe, peterole, liindasteri tsa lik'hemik'hale, liindasteri tsa ntoa le motlakase, ho lokisa lijo le indasteri ea bongaka, mochini o futhumatsang mocheso, mochini le masimo a hardware. |
| Ho paka | Pakete e tloaelehileng ea kantle ho naha kapa ho latela litlhoko tsa hau / ho paka ka mokhoa o ikhethileng |
| Tefo | T/T, L/C ka pono, Western Union,DP |
316N/316LN sebopeho sa lik'hemik'hale tsa tšepe e sa hloekang
| Sebopeho sa lik'hemik'hale tsa tšepe e sa hloekang 316 | ||||
| Letlapa la 1. Sebopeho sa lik'hemik'hale tse tloaelehileng bakeng sa li-alloys tse 316 tsa tšepe e sa hloekang | ||||
| % | 316 | 316L | 316H | 316Ti |
| C | 0.08 | 0-0.03 | 0.04-1 | 0-0.08 |
| Mn | 2.00 | 0-2.0 | 0-2.0 | 0-2.00 |
| Si | 1.00 | 0-1 | 0-1 | 0-1.00 |
| P | 0.045 | 0-0.45 | 0-0.05 | 0=0.045 |
| S | 0.03 | 0-0.03 | 0-0.03 | 0-0.030 |
| Cr | 16.00-18.00 | 10.00-18.00 | 16.00-18.00 | 16.00-18.00 |
| Ni | 10.00-14.00 | 10.00-14.00 | 10.00-14.00 | 10.00-14.00 |
| M0 | 2.00-3.00 | 2.00-3.00 | 2.00-3.00 | TI≥5C |
| Fe | Ho leka-lekanya | Ho leka-lekanya | Ho leka-lekanya | Ho leka-lekanya |
| Thepa ea Mechini ea tšepe e sa hloekang 316 | ||||
| Kereiti | 316 | 316L | 316H/316TI | |
| Matla a Tensile (N/mm²) | ≥520 | ≥480 | - | |
| Matla a tlhahiso (N/mm²) | 210 | - | - | |
| Bopaki ba Stress 0.2% (MPa) | 210 | 200 | - | |
| Elongation A5 (%) | 40 mets | 40 mets | - | |
| Hardness Rockwell B | 90 | - | - |
Nako ea poso: Feb-11-2023